Could CHP Work for Your Business? A Director’s Guide

Could CHP Work for Your Business? A Director’s Guide

Brian Lynggaard·11 November 2026·11 min read

Combined Heat and Power, usually shortened to CHP, can sound like a highly technical subject. But for company directors, the starting question is simple: could generating electricity and useful heat together make sense for your site?

In a volatile energy market, it is understandable to focus on the next electricity or gas contract renewal. That matters, but it is also worth stepping back and reviewing how your business uses energy in the first place. For some organisations, CHP may be worth exploring as part of a broader plan to manage costs, improve efficiency and support sustainability objectives.

It will not be the right answer for every site. The value of a CHP system depends on your operational pattern, energy demand, equipment, fuel options and wider plans. The important thing is to ask the right questions before renewal pressure builds.

What is CHP and how does it work?

CHP stands for Combined Heat and Power. It is a system that produces electricity on site while also capturing heat for use in the business.

Traditionally, a site might buy electricity from the grid and use a separate boiler or heating system to provide hot water, space heating, steam or process heat. CHP brings those two jobs together. A fuel powers an engine, turbine or similar unit to generate electricity. Instead of allowing the heat created during that process to go unused, the system captures it and puts it to work where there is a genuine demand.

A simple view of the process looks like this:

Fuel input → CHP unit → Electricity for the site
→ Useful heat for heating, hot water, steam or processes

The electricity generated may be used within the site, reducing the amount that needs to be bought from the grid at that time. The recovered heat can support relevant operational or building needs. Some sites may also retain grid electricity and other heat sources as part of their overall set-up.

The key word here is useful. CHP tends to be most relevant where there is regular, practical use for both the electricity and the heat being produced. Generating heat that cannot be used does not create the same commercial case.

The operational signs that CHP may be worth a conversation

There is no one-size-fits-all profile for commercial CHP. However, certain operating patterns can make a review worthwhile.

You may wish to explore CHP if your business has steady electricity use alongside a consistent need for heat. This could include demand for building heating, hot water, steam, drying, cleaning, cooking, washing, manufacturing processes or other temperature-controlled operations.

Useful questions to consider include:

  • Does your site use significant electricity across much of the day or week?
  • Is there a regular requirement for heating, hot water, steam or process heat?
  • Does this demand remain reasonably consistent rather than appearing only occasionally?
  • Are electricity and gas costs an important part of your operating expenditure?
  • Is your existing heating or energy equipment approaching a point where replacement or review is already being considered?
  • Are you looking at ways to support wider net zero targets without making decisions in isolation?

A business with sharply changing demand may still have options, but the assessment becomes more important. A CHP system needs to be considered around how a site actually operates, not simply around a headline view of annual energy spend.

For directors, that means looking beyond bills alone. Half-hourly electricity data, gas consumption, operating hours, seasonal patterns and the type of heat required can all help build a clearer picture.

Questions directors should ask before making a decision

A good CHP review should be commercial as well as technical. It should consider whether the system could suit your operational needs today and whether it remains sensible as your business changes.

Start with these practical questions:

What problem are we trying to solve? Is the priority reducing exposure to bought-in electricity, making better use of energy on site, replacing ageing equipment, supporting sustainability plans, or a combination of these factors? Being clear on the objective helps avoid investing in a solution that does not match the need.

When do we use electricity and heat? Timing matters. A site that needs electricity and useful heat at similar times may have a stronger reason to investigate CHP than one where demand patterns rarely overlap.

What fuel and technology options are appropriate? CHP systems can vary considerably. Their environmental and commercial profile depends on the technology, fuel source, site requirements and how the system will be operated. It is important not to assume that every CHP option has the same sustainability credentials.

How would CHP work alongside our existing supply arrangements? A CHP project should not be viewed separately from your electricity and gas contracts. Import requirements, export arrangements where relevant, maintenance, resilience and future procurement all need consideration.

What happens as our business changes? A site expansion, change in production, shift in working hours or move towards electrification can alter the picture. Directors should consider future plans before committing to a long-term energy asset.

CHP should form part of a wider utilities review

CHP can be one piece of a sustainable energy strategy, but it should not automatically be the first or only option examined. The strongest decisions usually come from looking at the full utilities picture.

That includes reviewing current electricity and gas contracts early, rather than waiting until renewal deadlines create unnecessary pressure. Our guide to the [utility contract renewal countdown for UK businesses](/blog/utility-contract-renewal-countdown-uk-businesses) explains why early preparation can give directors more time to understand their options.

It also means considering how CHP may sit alongside solar and battery storage. Solar can generate electricity when conditions allow, while battery storage may help a site manage when that electricity is used. CHP provides a different type of on-site generation, particularly where useful heat is required. The right combination will depend on your premises, demand profile and commercial priorities.

Water and waste should also be part of the conversation. Utility outgoings are connected to how a business operates, and an effective review should not stop at electricity and gas. Water use, wastewater arrangements, waste management and efficiency opportunities may all affect both costs and sustainability planning. For a wider risk perspective, read our article on [why water security should be on every business risk register](/blog/why-water-security-should-be-on-every-business-risk-register).

In a marketplace where wholesale energy conditions can move quickly, it is particularly useful to separate urgent contract decisions from long-term operational planning. As we covered in [how the Middle East conflict is reshaping the UK energy market](/blog/how-the-middle-east-conflict-is-reshaping-the-uk-energy-market-and-what-it-means-for-your-business), market uncertainty can affect the choices businesses face at renewal. A broader review gives you more information before decisions need to be made.

Review before pressure builds

CHP is not a standard answer, and it should not be selected on assumptions. But where a business has a steady need for both electricity and useful heat, it may deserve a place on the agenda.

The best first step is to understand your current position: how you use energy, when you use it, what contracts are in place and which technologies could genuinely support your operational and sustainability goals.

Business Utility Agents Ltd can review your operational requirements and help you explore whether CHP could form part of a commercially sound, sustainable energy strategy, alongside energy procurement, solar, battery storage, water and waste services. [Visit Business Utility Agents Ltd](https://www.businessutilityagents.co.uk) to start the conversation.

Combined heat and power: a director’s quick suitability check

A combined heat and power project is usually worth initial investigation when a site can use electricity and heat at the same time for much of its operating year. The strongest cases typically combine a stable electrical base load with a dependable demand for low-temperature hot water, higher-temperature hot water, steam or process heat.

  • Check the load profile: review half-hourly electricity consumption, gas use and operating hours rather than annual spend alone.
  • Confirm heat can be used: identify where recovered heat would displace boiler fuel, such as hot-water production, wash-down, space heating or a process.
  • Assess operational continuity: establish whether the site runs long enough for a CHP unit to operate efficiently.
  • Compare realistic alternatives: include boiler replacement, heat pumps, energy efficiency measures, solar generation and battery storage where relevant.
  • Review the future plan: consider lease length, production changes, decarbonisation targets and planned building upgrades.

If either electricity demand or usable heat demand is intermittent, detailed modelling is particularly important before committing capital.

How a CHP feasibility assessment should use your energy data

CHP should be sized around the site’s lowest dependable level of concurrent electricity and heat demand, not around the largest unit that could physically fit in the plant room. Oversizing can leave a unit producing electricity or heat that has limited value.

  1. Collect at least a full year of half-hourly electricity data, gas bills and boiler consumption information.
  2. Map operating hours, shutdowns, weekends and seasonal changes in demand.
  3. Identify the heat load by temperature and purpose: space heating, domestic hot water, steam, drying, cooking, cleaning or another process.
  4. Establish the site’s electrical base load: the demand likely to remain while the CHP unit is operating.
  5. Model how much generated electricity can be used on site and how much recovered heat can displace existing fuel use.
  6. Test the outcome against planned expansion, reduced occupancy, electrification or changes to production.

This process also identifies when thermal storage, a supplementary boiler or continued grid imports are needed to keep the site flexible.

Which combined heat and power technology may fit a commercial site?

CHP is not a single technology. The appropriate system depends on required electrical output, fuel availability, heat temperature, running hours and maintenance capability.

  • Reciprocating gas engines: commonly considered where a site has a consistent electrical load and can use hot water recovered from engine cooling and exhaust systems.
  • Gas turbines: can be relevant for larger sites, particularly where high-temperature exhaust heat can support steam production or industrial processes.
  • Micro-CHP: smaller systems designed for modest heat and power requirements, often centred on building hot-water demand.
  • Biogas or biomethane CHP: may be considered where an eligible local fuel supply exists, but fuel quality, supply security and emissions requirements need assessment.
  • Trigeneration: uses CHP heat to drive cooling equipment, which can improve heat use at sites with a substantial cooling demand.

The heat requirement matters as much as electrical demand. A site needing steam has different technical options from one that primarily needs low-temperature heating water.

How do directors assess the business case for combined heat and power?

What creates CHP savings? The potential value comes from generating electricity that the site would otherwise import and using recovered heat that would otherwise be produced by boilers or other equipment. The result depends on the relative cost of fuel, imported electricity, maintenance and finance.

What costs should be included? A whole-life appraisal should include equipment, installation, design, grid connection works, gas connection capacity where needed, maintenance, planned overhaul costs, insurance, metering, controls and any plant-room modifications.

Does exported electricity improve the case? It can have value, but a proposal should not rely on export assumptions without checking the available export arrangement and network constraints. On-site use is often central to the assessment.

How should payback be tested? Use several fuel-price and electricity-price scenarios, include expected operating hours, and stress-test the model for lower heat demand. Directors should also compare the project with the cost and performance of credible alternatives.

UK checks to complete before progressing a CHP project

For a UK site, CHP due diligence should cover more than equipment performance. The Department for Energy Security and Net Zero operates the CHP Quality Assurance programme, generally known as CHPQA, which provides a framework for assessing qualifying CHP schemes. Eligibility and requirements should be checked for the specific installation and current scheme rules.

  • Distribution network operator: contact the local DNO early to understand generation connection, import capacity, export capability and protection requirements.
  • Ofgem and supplier arrangements: confirm metering, settlement and export arrangements where electricity may be exported.
  • Environmental permitting: assess emissions controls, local authority requirements and whether the plant is within the scope of environmental regulations.
  • Building and planning requirements: consider flues, noise, ventilation, fuel infrastructure and plant-room access.
  • ESOS and SECR reporting: ensure projected energy and carbon impacts are evaluated consistently with the organisation’s reporting approach.

Specialist legal, environmental and engineering advice is appropriate because obligations differ by location, fuel, plant size and operating model.